Reciprocating Pumps & Vacuum Jacketed Cold Ends

CS&P Technologies comprehensive line of high pressure pumps have a proven track record in the field. High pressure pumps can be purchased individually or as a system complete with electric motor belt drive with guard, and discharge piping with the surge chamber and relief valve.

• Wide variety of flow rates for liquified gases.
• Pressure rating up to 13,300 PSI / 917 BAR
• Available in Simplex, Duplex, and Triplex configurations to minimize vibration at different flow rates.

CS&P provides a rebuild/exchange program for all equipment.

Options

Accessories are available for high pressure pumps, including gear reduction boxes, pressure relief valves, downstream check valves, suction, discharge and vent manifolds.

Sizes available include:

• HPR-Series
  HPR datasheet
  
  
• ICP-45
  ICP-45 datasheet
  Designed for maximum 25 HP (18.64 Kw) Grease lubricated
  Minimum speed 90 RPM
  Maximum continuous speed 560 RPM
  Maximum Intermittent speed 750 RPM
  Available flows between .09-5 GPM (0.34-18.9 L/M)
  Discharge pressures up to 8,200 PSI (565.37 BAR)"
  Stroke available .8", 1.0", & 1.25" (20.32mm, 25.4mm, & 31.75mm) Vacuum Jacketed Cold End's available:
  • 0.625" 15.87mm Flow .09-1.1 GPM (.09-4.16 L/M), MAWP 8,200PSI (565 BAR)
  • 0.875" 22.22mm Flow .17-2.2 GPM (.64-8.3 L/M), MAWP 8,200 PSI (565 BAR)
  • 1.0" 25.40mm Flow .23-5 GPM (.87-18.9 L/M), MAWP 6,200 PSI (427 BAR)
  • 1.2" 30.48mm Flow .32-7.2 GPM (1.2-27.25 L/M), MAWP 4,250 PSI (293 BAR)
  • 1.312" 33.32mm Flow .4-8.6 GPM (1.5-32.5 L/M), MAWP 3,330 PSI (229.5 BAR)
  
  
• ICP-75
  Designed for maximum 75 HP (55.92 Kw)
  Available simplex, duplex, & triplex
  Oil splash lubrication
  Minimum speed 90 RPM
  Maximum continuous speed 560 RPM
  Maximum intermittent speed 875 RPM
  Available flows between .4-23 GPM (1.5-87 L/M)
  Discharge pressures up to 13,300 PSI (917 BAR)
  Stroke available 1.375"" & 1.875"" (34.92mm & 47.62mm)
  Vacuum Jacketed Cold End's available:
  • 1.0" 25.40mm Flow .23-5 GPM (.87-18.9 L/M), MAWP 6,200 PSI (427 BAR
  • 1.2" 30.48mm Flow .32-7.2 GPM (1.2-27.25 L/M), MAWP 4,250 PSI (293 BAR)
  • 1.312" 33.32mm Flow .4-8.6 GPM (1.5-32.5 L/M), MAWP 3,330 PSI (229.5 BAR)
  
  
• ICPV-200
  Designed for maximum 200 HP (149.14 Kw)
  Available simplex, duplex, & triplex
  Internal or external pressure lube system
  Minimum speed 150 RPM internal lube / 60 RPM external lube
  Maximum continuous speed 750 RPM
  Maximum intermittent speed 900 RPM
  Available flows between .26-93 GPM (1-352 L/M)
  Discharge pressures up to 6,000 PSI (413.68 BAR)
  Stroke available 1.375"" (34.92mm)
  Vacuum Jacketed Cold End's available:
  • 1.0" 25.40mm Flow .23-5 GPM (.87-18.9 L/M), MAWP 6,200 PSI (427 BAR)
  • 1.2" 30.48mm Flow .32-7.2 GPM (1.2-27.25 L/M), MAWP 4,250 PSI (293 BAR)
  • 1.312" 33.32mm Flow .4-8.6 GPM (1.5-32.5 L/M), MAWP 3,330 PSI (229.5 BAR)
  • 1.625" 41.275mm Flow .7-30 GPM (2.6-113.5 L/M), MAWP 6,000 PSI (412.6 BAR)
  • 2.875" 73.025mm Flow 2.1-93 GPM (7.9-352 L/M), MAWP 2,500 PSI (172 BAR)

***ALL WARM ENDS CAN BE USED FOR OXYGEN SERVICE WITH PROPER OIL/GREASE***